Mold Collapsible Core polishing needs to understand the following steps

Mold Collapsible Core polishing needs to understand the following steps

After Mold Collapsible Core is completed, it must be polished, but how to do it reasonably? There are the following steps.

1. Do a good job in the management of abrasive materials, the cleaning (dust reduction), lighting, etc. of the work site;

2. Deal with difficult corners, edges, and potholes first;

3. When the previous scratch is removed, the abrasive must be replaced immediately;

4. Sufficiently replenish the grinding oil;

5.Each pass avoid long-term excessive pressure on the polished surface (100-200g/cm2);

6. The polishing material (fabric) and the rotating speed of the polishing wheel that match the particle size of the diamond paste are used;

7. When the polishing work is interrupted, the mold must be adequately protected against rust;

8. Complete each polishing process in the shortest time to avoid excessive polishing.

Mold Collapsible Core is a very important product, so in the production, we must pay attention to every process in order to ensure a longer service life.